Welcome to Almushaiti

Pitches

C2082HA1

C2082HK1

Chain No.		Pitch P	Width between inner plates W	Roller diameter D	Pin						Link plate		JIS & ANSI Tensile strength kgf (kN)	Average Tensile strength kgf (kN)	Maximum Tensile strength kgf (kN)	Approx weight (kg/m)	Links of l unit
SH	JIS & ANSI	Pitch P	Width between inner plates W	Roller diameter D	Diameter d	A	B	(A+A) L1	(A+B) L2	Offset L	Thick-ness T	Height H	JIS & ANSI Tensile strength kgf (kN)	Average Tensile strength kgf (kN)	Maximum Tensile strength kgf (kN)	Approx weight (kg/m)	Links of l unit
25	25	6.35	3.18	*3.30	2.31	3.80	4.80	7.60	8.60		0.8	5.8	357 (3.5)	450 (4.4)	65 (0.64)	0.13	480
35	35	9.53	4.78	*5.08	3.59	5.70	7.10	11.40	12.80	13.65	1.3	8.8	806 (7.9)	1.100 (10.8)	220 (2.16)	0.33	320
41	41	12.70	6.38	7.77	3.59	6.52	7.93	13.05	14.45	14.95	1.3	9.5	683 (6.7)	1.200 (11.8)	230 (2.26)	0.40	240
40	40	12.70	7.95	7.95	3.97	8.02	9.53	16.05	17.55	18.95	1.5	11.7	1.407 (13.8)	1.850 (18.1)	370 (3.63)	0.61	240
50	50	15.88	9.53	10.16	5.09	15.15	11.60	20.30	21.75	23.00	2.0	14.6	2.223 (21.8)	3.050 (29.9)	650 (6.37)	1.01	192
60	60	19.05	12.70	11.91	5.96	12.65	14.15	25.30	26.80	29.45	2.4	17.5	3.172 (31.1)	4.200 (41.2)	900 (8.83)	1.49	160
80	80	25.40	15.88	15.88	7.94	16.07	19.18	32.15	35.25	36.90	3.2	23.0	5.670 (55.6)	7.400 (72.6)	1.500 (14.71)	2.50	120
100	100	31.75	19.05	19.05	9.54	20.10	23.05	40.20	43.15	45.05	4.0	28.9	8.841 (86.7)	11.500 (112.8)	2.300 (22.56)	3.85	93
120	120	38.10	25.40	22.23	11.11	25.20	28.60	50.40	53.80	55.90	4.8	35.0	12.706 (124.6)	16.000 (156.9)	3.100 (30.40)	5.66	80
140	140	44.45	25.40	25.40	12.71	27.30	31.30	54.60	58.60	60.50	5.6	40.7	17.233 (169.0)	21.500 (210.8)	4.100 (40.21)	7.19	68
160	160	50.80	31.75	28.58	14.29	32.45	37.15	64.90	69.60	71.85	6.4	46.7	22.678 (222.4)	27.500 (269.7)	5.400 (52.96)	9.63	60
200	200	63.50	38.10	39.68	19.86	39.65	46.65	79.30	86.30	89.20	8.0	58.4	35.385 (347.0)	48.000 (470.7)	7.300 (71.59)	15.97	48
240	240	76.20	47.63	47.63	23.81	48.20	55.60	96.40	103.80	107.00	9.5	75.4	51.027 (500.4)	70.000 (686.5)	10.100 (99.05)	24.50	40

Chains

Model A

جنزير لتحمل العمل الشاق والمسافات الطويلة

THIS CHAIN IS SPECIAL FOR HIGH LOAD AND LONG DISTANCE

Model B

Model C

جنزير خاص بالمواد الغذائية وتحمل الحرارة العالية

THIS CHAIN IS MADE FOR INDUSTRY AND HIGH TEMP

جنزير مثقوب خاص بالمواد الغذائية وتحمل الحرارة العالية

THIS CHAIN WITH HOLES IS MADE FOR FOOD INDUSTRY
AND HIGH TEMP

All the chains used in our conveyor lines have ISSO 9001